-
Capacitors
- Mundorf ECap
- Mundorf MCap
- Mundorf MCap RXF
- Mundorf MCap ZN
- Mundorf MCap SUPREME
- Mundorf MEAI
- Mundorf MEAIO
- Mundorf MESGO
- Mundorf MCap SUPREME silver/oil
- Mundorf MCap SUPREME silver/gold
- Mundorf MCap SUPREME silver/gold/oil
- Mundorf TubeCap
- Mundorf MLytic HV
- Mundorf MLytic AG
- Mundorf MLytyc HC
- Auricap XO
- Jantzen Audio MKT Cap
- Jantzen Audio Cross Cap
- Jantzen Audio Standard Z-Cap
- Jantzen Audio Superior Z-Cap
- Jantzen Audio Silver Z-Cap
- Jantzen Audio Copper Foil Amber Z-Cap
- Jantzen Audio Alumen Z-Cap
- Jantzen Audio SilverGold Z-cap
- Rike Audio S-cap Paper in Oil
- Mundorf Mlytic HC+ (4-pole)
- Mundorf MLytiv HV+ (4-Pin High Voltage Power Cap)
- Mundorf MCap SUPREME EVO
- Mundorf MCap SUPREME EVO Oil
- Mundorf MCap SUPREME EVO SilverGold
- Mundorf MCap SUPREME EVO SilverGold Oil
- Mundorf MLytic AG+
- RIKE Audio Q-Cap Copper Oil Polypropylen Capacitors
- RIKE Audio Oil-Paper-Capacitors - S-Cap 2
- Rike Audio Q-CAP2 PIO Copper Paper Oil capacitors
- Miflex Audio Capacitors
-
Coils
- Mundorf M-Coil
- Mundorf M-Coil BV
- Mundorf M-Coil VL
- Mundorf MCoil VNCU ZeroOhm (resin-soaked)
- Mundorf M-Coil LL Hepta Strand
- Mundorf M-Coil CF
- Mundorf M-Coil transformer-core
- Mundorf M-Coil CF transformer-core
- Mundorf M-Coil BV transformer-core
- MCoil VT transformer-core vacuum impregnated
- Mundorf M-Coil CF i-core
- Mundorf M-Coil BV i-core
- Mundorf M-Coil drum-core
- Mundorf M-Coil drum-core BV
- Mundorf M-Coil pin-core
- Mundorf M-Coil rod-core
- Mundorf M-Coil BV rod-core
- Mundorf M-Coil CF rod-core
- Mundorf M-Coil zero-ohm
- Mundorf M-Coil CF silver
- Mundorf M-Coil silver/gold
-
Jantzen Air Cored Wire Coil
- Jantzen 13AWG 1,8mm Air Core Coils
- Jantzen 14AWG 1,6mm Air Core Coils
- Jantzen 15AWG 1,4mm Air Core Coils
- Jantzen 17AWG 1,2mm Air Core Coils
- Jantzen 18AWG 1,0mm Air Core Coils
- Jantzen 20AWG 0,8mm Air Core Coils
- Jantzen 21AWG 0,7mm Air Core Coils
- Jantzen 22AWG 0,63mm Air Core Coils
- Jantzen 24AWG 0,5mm Air Core Coils
- Jantzen 26AWG 0,4mm Air Core Coils
- Jantzen 29AWG 0,3mm Air Core Coils
- Jantzen Audio Wax Coil
-
Jantzen Iron Cored Coils With Discs
- Jantzen 13AWG 1,8mm Iron Cored Coils with Discs
- Jantzen 14AWG 1,6mm Iron Cored Coils with Discs
- Jantzen 15AWG 1,4mm Iron Cored Coils with Discs
- Jantzen 17AWG 1,2mm Iron Cored Coils with Discs
- Jantzen 18AWG 1mm Iron Cored Coils with Discs
- Jantzen 20AWG 0,8mm Iron Cored Coils with Discs
- Jantzen 21AWG 0,7mm Iron Cored Coils with Discs
- Jantzen 22AWG 0,63mm Iron Cored Coils with Discs
- Jantzen 24AWG 0,5mm Iron Cored Coils with Discs
- Jantzen 26AWG 0,4mm Iron Cored Coils with Discs
- Jantzen 29AWG 0,3mm Iron Cored Coils with Discs
- Jantzen C-Coil - Toroidal Core
- Jantzen Audio Cross Coil
-
Jantzen Audio Iron Coil
- Jantzen Audio Iron Coil 13AWG
- Jantzen Audio Iron Coil 14AWG
- Jantzen Audio Iron Coil 15AWG
- Jantzen Audio Iron Coil 17AWG
- Jantzen Audio Iron Coil 18AWG
- Jantzen Audio Iron Coil 20AWG
- Jantzen Audio Iron Coil 21AWG
- Jantzen Audio Iron Coil 22AWG
- Jantzen Audio Iron Coil 24AWG
- Jantzen Audio Iron Coil 26AWG
- Jantzen Audio Iron Coil 29AWG
- Jantzen Audio Litz Wire Wax Coil
- Mundorf MCoil VLCU
- Mundorf MCoil VSCU
- Mundorf MCoil VS iCore (resin-soaked)
-
Speaker Drivers
- Tweeters
- Midrange Drivers
- Fullrange
- Coaxial Drivers
- Midwoofer Drivers
- Woofers
- Passive Radiators
- Subwoofers
- Car Audio drivers
- Scan-Speak Discovery
- Scan-Speak Classic
- Scan-Speak Revelator
- Scan-Speak Illuminator
- Seas Prestige
- Seas Excel
- Seas Exotic
- Seas Lotus
- Design by SEAS
- SB Acoustics
- SB Acoustics Tweeters
- SB Acoustics Midrange
- SB Acoustics Midwoofer
- SB Acoustics Woofers
- SB Acoustics Passive radiators
- SB Acoustics Subwoofer
- SB Acoustics Satori
- Accuton
- Audiotechnology
- Mundorf Hi-Fi AMT U Series tweeters
- Speaker driver accessories
- Monitor Audio
- Kits, DIY and Loudspeaker upgrade kits
- Loudspeakers
-
Hi-Fi and Hi-End equipment
- Mediaplayers
- Amplifiers
- Vinyl Players
- Earthequake Sound Home Audio
- Earthequake Sound Car Audio
- Earthequake Sound Gaming Audio
- Earthequake Sound Pro Audio
- Sonnet digital audio
- Power conditioners and distributers
- Loudspeakers
- Streamers
- Portable headphone amplifiers
- Fuses and fuse holders
- Headphone Amplifiers
- DACs
- CD/SACD-players
- Accessories
Furutech Electrostatic brush (min order 10pcs), SK-Ill
SK-III
€125.00
Tax excluded
152.50 € tax incl. for EU buyers
Furutech Electrostatic brush (min order 10pcs), SK-Ill
Furutech Electrostatic brush (min order 10pcs), SK-Ill
FEATURES
Revolutionary Electrostatic AV accessory brush for improving sound and picture quality The new and improved SK-III features a rhodium coated metal grounding sleeve for improved conductivity and 10% more super fine Corona discharge fibers. For disk media (CDs, DVDs, LPs) AV Projector lenses, Plasma/LCD Screen
It has been known to all those concerned with high end audio and home theater for many years now that by removing electrostatic charge from audio and visual media a great improvement in sound and picture quality can be realized. But until now removing electrostatic charge has always been a costly exercise, both in time and money. Developed by SFC of Japan, the patented electrostatic brush SK-III has arrived brought to you by Furutech.
This revolutionary product, so simple to use, will change your listening or viewing experience for good. See and hear a difference can be realized in minutes. Experience what the product that has become such a great hit among Japanese high-end audio and home theater fans.
Now Furutech brings this incredible product to audio and home theater lovers of the world.
The SK-III uses a combination of the finest goat hair and Corona discharge fibers. Hard to come by and extremely soft, the goats hair used on the SK-III is perfect for cleaning dust out of those precious LPs and will not leave the slightest mark on CDs, DVD or projector lenses. Very portable, easy to use and comes with a clear plastic cover to keep the bristles of the brush well protected.
As all audio and visual fans know the more we use our CD/SACD/DVD/DVD-Audio disks, the more dust and fingerprints are left on the surface of the disks. Using disk cleaners, we wash and wipe them with cloths, but in doing so we inadvertently electro statically charge our media. Not to mention the resulting static charge from the simple action of removing them from their protective cases or covers. In the case of CDs 300~500V of frictional static electricity and ten times that for LPs, 3,000~20,000V.
When disk media is played in the statically charged state, generally sounds are clouded, vowel sounds become thin and lower range sounds cannot be heard to their full potential.
With regards to LPs the adding to the scratch noises, the noise from the sparks caused by static charge can be heard through the speakers during pick up.
By using the SK-III and lightly brushing the surface of LPs, CDs or DVDs in a circular motion, the sound quality of LPs and CDs will be improved and the image quality on DVD replay will also improve.
The reliability and effectiveness of the SK-III’s ability to remove static charge is well known to and used exclusively by the meticulous Japanese Police Force in their crime scene investigations, brushing away the aluminum particles to reveal fingerprints. The SK-III is their trusted choice.
About the SK-III
1. Materials: Natural Goats hair surrounded by thicker strengthening acrylic Corona discharge fibers. Only the natural fine goat hair is exposed to any disk media and will not damage or mark in any way.
2. By using electrically conductive acrylic fibers that have been coated with copper sulfide and binding them together with a metal band, when both sides of the metal band are held during use, a corona discharge results; thereby removing static charge from media and charged dust particles.
3. The new SK-III features a rhodium coated metal grounding sleeve for improved conductivity. Make sure at least one finger has contact with the metal sleeve when using the SK-III.
3. The acrylic fibers have been set back 15mm from the tip of the brush and their chemical coating absorbs positively charged copper ions. The structure of these electrically conductive acrylic fibers (40 denier, thickness 69.3 microns) is patented (#1677237).
4. After a considerable amount of use the SK-III can be washed using a neutral cleansing agent and rinsed well with water and left to dry in the shade (please do not wash with cleansing agents containing bleach).
5. Usually it is enough to just simply brush away most of the static charge, but if you would like to rid your media completely of Static charge then dab a slightly damp tissue paper on the surface of the media.
6. This product is also very effective for use on Projector lenses, LCD screens, Plasma screens as well as CDs, DVDs and LPs.
It has been known to all those concerned with high end audio and home theater for many years now that by removing electrostatic charge from audio and visual media a great improvement in sound and picture quality can be realized. But until now removing electrostatic charge has always been a costly exercise, both in time and money. Developed by SFC of Japan, the patented electrostatic brush SK-III has arrived brought to you by Furutech.
This revolutionary product, so simple to use, will change your listening or viewing experience for good. See and hear a difference can be realized in minutes. Experience what the product that has become such a great hit among Japanese high-end audio and home theater fans.
Now Furutech brings this incredible product to audio and home theater lovers of the world.
The SK-III uses a combination of the finest goat hair and Corona discharge fibers. Hard to come by and extremely soft, the goats hair used on the SK-III is perfect for cleaning dust out of those precious LPs and will not leave the slightest mark on CDs, DVD or projector lenses. Very portable, easy to use and comes with a clear plastic cover to keep the bristles of the brush well protected.
As all audio and visual fans know the more we use our CD/SACD/DVD/DVD-Audio disks, the more dust and fingerprints are left on the surface of the disks. Using disk cleaners, we wash and wipe them with cloths, but in doing so we inadvertently electro statically charge our media. Not to mention the resulting static charge from the simple action of removing them from their protective cases or covers. In the case of CDs 300~500V of frictional static electricity and ten times that for LPs, 3,000~20,000V.
When disk media is played in the statically charged state, generally sounds are clouded, vowel sounds become thin and lower range sounds cannot be heard to their full potential.
With regards to LPs the adding to the scratch noises, the noise from the sparks caused by static charge can be heard through the speakers during pick up.
By using the SK-III and lightly brushing the surface of LPs, CDs or DVDs in a circular motion, the sound quality of LPs and CDs will be improved and the image quality on DVD replay will also improve.
The reliability and effectiveness of the SK-III’s ability to remove static charge is well known to and used exclusively by the meticulous Japanese Police Force in their crime scene investigations, brushing away the aluminum particles to reveal fingerprints. The SK-III is their trusted choice.
About the SK-III
1. Materials: Natural Goats hair surrounded by thicker strengthening acrylic Corona discharge fibers. Only the natural fine goat hair is exposed to any disk media and will not damage or mark in any way.
2. By using electrically conductive acrylic fibers that have been coated with copper sulfide and binding them together with a metal band, when both sides of the metal band are held during use, a corona discharge results; thereby removing static charge from media and charged dust particles.
3. The new SK-III features a rhodium coated metal grounding sleeve for improved conductivity. Make sure at least one finger has contact with the metal sleeve when using the SK-III.
3. The acrylic fibers have been set back 15mm from the tip of the brush and their chemical coating absorbs positively charged copper ions. The structure of these electrically conductive acrylic fibers (40 denier, thickness 69.3 microns) is patented (#1677237).
4. After a considerable amount of use the SK-III can be washed using a neutral cleansing agent and rinsed well with water and left to dry in the shade (please do not wash with cleansing agents containing bleach).
5. Usually it is enough to just simply brush away most of the static charge, but if you would like to rid your media completely of Static charge then dab a slightly damp tissue paper on the surface of the media.
6. This product is also very effective for use on Projector lenses, LCD screens, Plasma screens as well as CDs, DVDs and LPs.
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent