SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
search
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-8

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-4

SB17CAC35-4
€64.90 Tax excluded
79.18 € tax incl. for EU buyers

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-4

Quantity
In Stock

SB Acoustics 6" mid/woofer, 35mm VC, ceramic cone, SB17CAC35-4

Special Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Geometrically reinforced ceramic cone for optimum piston operation and reduced break-up
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specifications:

Nominal Impedance 4 Ω Free air resonance, Fs 29.5 Hz
DC resistance, Re 3.1 Ω Sensitivity (2.83 V / 1 m) 90 dB
Voice coil inductance, Le 0.13 mH Mechanical Q-factor, Qms 4.70
Effective piston area, Sd 118 cm2 Electrical Q-factor, Qes 0.31
Voice coil diameter 35.5 mm Total Q-factor, Qts 0.29
Voice coil height 16 mm Moving mass incl.air, Mms 15.2 g
Air gap height 5 mm Force factor, Bl 5.3 Tm
Linear coil travel (p-p) 11 mm Equivalent volume, Vas 37.8 liters
Magnetic flux density 1.0 T Compliance, Cms 1.91 mm/N
Magnet weight 0.54 kg Mechanical loss, Rms 0.6 kg/s
Net weight 1.56 kg Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB Acoustics
SB17CAC35-4
Comments (0)
No customer reviews for the moment.