SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8
search
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8
  • SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8

SB17MFC35-8
58,00 € Maksudeta
70.76 € tax incl. for EU buyers

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8

Kogus
Laos

SB Acoustics 6" mid/woofer, 35mm VC MFC Poly Cone, SB17MFC35-8

Special Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Mineral filled PP-cone made in-house
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specifications:

Nominal Impedance 8 Ω Free air resonance, Fs 33 Hz
DC resistance, Re 5.7 Ω Sensitivity (2.83 V / 1 m) 88 dB
Voice coil inductance, Le 0.15 mH Mechanical Q-factor, Qms 4.9
Effective piston area, Sd 118 cm2 Electrical Q-factor, Qes 0.40
Voice coil diameter 35.5 mm Total Q-factor, Qts 0.37
Voice coil height 16 mm Moving mass incl.air, Mms 11.8 g
Air gap height 5 mm Force factor, Bl 5.9 Tm
Linear coil travel (p-p) 11 mm Equivalent volume, Vas 39 liters
Magnetic flux density 1.0 T Compliance, Cms 1.97 mm/N
Magnet weight 0.54 kg Mechanical loss, Rms 0.5 kg/s
Net weight 1.56 kg Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB Acoustics
SB17MFC35-8
Kommentaarid (0)
Hetkel pole ühtegi ülevaadet