SB Acoustics 5" Satori midwoofer , MW13P-4
search
  • SB Acoustics 5" Satori midwoofer , MW13P-4
  • SB Acoustics 5" Satori midwoofer , MW13P-4
  • SB Acoustics 5" Satori midwoofer , MW13P-4
  • SB Acoustics 5" Satori midwoofer , MW13P-4

SB Acoustics 5" Satori midwoofer , MW13P-4

MW13P-4
123,00 € Без НДС
150.06 € с НДС для покупателей из ЕС

SB Acoustics 5" Satori midwoofer , MW13P-4

Количество
В наличии

SB Acoustics 5" Satori midwoofer , MW13P-4

Special Features

  • Vented aerodynamic cast aluminium chassis for optimum strength and low compression
  • Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
  • Soft low damping rubber surround for optimum transient response
  • Advanced BIMAX spider for improved linearity
  • Powerful optimized low distortion neodymium motor system
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and reduced distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires attached 180° apart for improved stability
  • Vented pole piece and coil former for reduced compression
  • High piston to chassis diameter ratio
  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Specifications:

Nominal Impedance 4 Ω Free air resonance, Fs 41 Hz
DC resistance, Re 3.8 Ω Sensitivity (2.83 V / 1 m) 89 dB
Voice coil inductance, Le 0.13 mH Mechanical Q-factor, Qms 3.71
Effective piston area, Sd 70 cm2 Electrical Q-factor, Qes 0.29
Voice coil diameter 30.5 mm Total Q-factor, Qts 0.27
Voice coil height 15 mm Moving mass incl.air, Mms 7.2 g
Air gap height 5 mm Force factor, Bl 4.9 Tm
Linear coil travel (p-p) 10 mm Equivalent volume, Vas 14.6 liters
Magnetic flux density 1.08 T Compliance, Cms 2.09 mm/N
Magnet weight 0.1 kg Mechanical loss, Rms 0.5 kg/s
Net weight 0.78 kg Rated power handling* 40 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB Acoustics
MW13P-4

Возможно, вам понравится

Комментарии (0)
Еще нет отзывов.