SB Acoustics 5" Satori midrange , MR13P-4
search
  • SB Acoustics 5" Satori midrange , MR13P-4
  • SB Acoustics 5" Satori midrange , MR13P-4
  • SB Acoustics 5" Satori midrange , MR13P-4
  • SB Acoustics 5" Satori midrange , MR13P-4

SB Acoustics 5" Satori midrange , MR13P-4

MR13P-4
137,00 € Без НДС
167.14 € с НДС для покупателей из ЕС

SB Acoustics 5" Satori midrange , MR13P-4

Количество
В наличии

SB Acoustics 5" Satori midrange , MR13P-4

Special Features

  • Vented aerodynamic cast aluminium chassis for optimum strength and low compression.
  • Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house.
  • Soft low damping rubber surround for optimum transient response.
  • Advanced BIMAX spider for improved linearity.
  • Powerful optimized low distortion neodymium motor system.
  • Non-conducting fibre glass voice coil former for minimum damping.
  • Extended copper sleeve on pole piece for low inductance and reduced distortion.
  • CCAW voice coil for reduced moving mass.
  • Long life silver lead wires attached 180° apart for improved stability.
  • Vented pole piece and coil former for reduced compression.
  • High piston to chassis diameter ratio.
  • Gasket and bolt hole protrusions for reduced coupling to speaker cabinet.

Specifications:

Nominal Impedance 4 Ω Free air resonance, Fs 41 Hz
DC resistance, Re 3.3 Ω Sensitivity (2.83 V/1m) 91 dB
Voice coil inductance, Le 0.11 mH Mechanical Q-factor, Qms 2.8
Effective piston area, Sd 70 cm2 Electrical Q-factor, Qes 0.25
Voice coil diameter 30.5 mm Total Q-factor, Qts 0.23
Voice coil height 11 mm Moving mass incl. air, Mms 5.4 g
Air gap height 5 mm Force factor, Bl 4.3 Tm
Linear coil travel (p-p) 6 mm Equivalent volume, Vas 19.4 liters
Magnetic flux density 1.08 T Compliance, Cms 2.79 mm/N
Magnet weight 0.1 kg Mechanical loss, Rms 0.5 kg/s
Net weight 0.78 kg Rated power handling* - W
* IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct.
SB Acoustics
MR13P-4

Возможно, вам понравится

Комментарии (0)
Еще нет отзывов.