SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8
search
  • SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8
  • SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8
  • SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8

SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8

SB12CACS25-8
46,85 € Без НДС
57.16 € с НДС для покупателей из ЕС

SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8

Количество
В наличии

SB Acoustics 4" mid/woofer, 25mm VC, ceramic cone, SB12CACS25-8

Special Features

  • Vented cast aluminum chassis for optimum strength and low compression
  • Geometrically reinforced ceramic cone for optimum piston operation and reduced break-up
  • Soft low damping rubber surround for improved transient response
  • Non-conducting fibre glass voice coil former for minimum damping
  • Extended copper sleeve on pole piece for low inductance and low distortion
  • CCAW voice coil for reduced moving mass
  • Long life silver lead wires
  • Vented pole piece for reduced compression

Specifications:

Nominal Impedance 8 Ω Free air resonance, Fs 51 Hz
DC resistance, Re 6.4 Ω Sensitivity (2.83 V / 1 m) 85.5 dB
Voice coil inductance, Le 0.34 mH Mechanical Q-factor, Qms 4.85
Effective piston area, Sd 50 cm2 Electrical Q-factor, Qes 0.4
Voice coil diameter 25.4 mm Total Q-factor, Qts 0.37
Voice coil height 15 mm Moving mass incl.air, Mms 5.3 g
Air gap height 5 mm Force factor, Bl 5.2 Tm
Linear coil travel (p-p) 10 mm Equivalent volume, Vas 6.5 liters
Magnetic flux density 1.07 T Compliance, Cms 1.84 mm/N
Magnet weight 0.40 kg Mechanical loss, Rms 0.35 kg/s
Net weight 0.92 kg Rated power handling* 30 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
SB Acoustics
SB12CACS25-8
Комментарии (0)
Еще нет отзывов.