Oyaide Multi-use Carbon Insulator Pipe set for STB-MSX 6pcs set STB-CM-6

Description

OYAIDE STB-CM-6 multi-use carbon pipe (one set of six)

The possibility that is infinite depending on a cable stabilizer, an insulator, an idea including the weight for the exchange of "STB-MSX." A multi-use carbon pipe.

Oh, in Ide Electric, I pay my attention to the acoustic feature of the carbon material quickly and release many audio system accessories. I made use of this know-how, and multi-use carbon pipe "STB-CM" was designed. The vibration spread is early and molds tough and lightweight carbon CFRP into a fleshy pipe of the 3mm thickness form. This simple pipe which and is extremely tough right "a multi-use." I show vibration processing capacity only by the carbon, an electromagnetic wave shield effect in various scenes.

"STB-CM" provides, for example, new charm to a sound quality tune nap of the analog reproduction as weight for the exchange of record stabilizer "STB-MSX". In addition, it is set up as an insulator to put through cable or the RCA plug as a cable stabilizer by the retainer of an audio product and the speaker. Furthermore, I hide infinite possibility as a board support, the parts holders such as condensers, a structural element of one's own item including the volume knob. Please check possibility covered by simple form of "STB-CM" by an idea and practice of the user.

Characteristic

●With an extremely-thick CFRP pipe of thickness 3mm, high speed handles unnecessary vibration:
Multi-layer laminates carbon fiver and thermally cures it with epoxy resin. I mold it as an extremely-thick CFRP pipe of thickness 3mm. High speed handles unnecessary vibration with high stiffness only by the carbon. I can expect the improvement of resolution, the S/N ratio with the electromagnetic wave shield, too. In addition, in "STB-CM," 500 kg/ of load-resistant, heat resistance possess 120 degrees Celsius and the sufficient strength and durability.
In addition, as for the circumferential edge, it is taken a taper step in "STB-CM" edge faces to be hard to damage it for a use object.

●Including a composing type to "STB-MSX", I realize the sound quality tune that is high speed:
Replacing it with the attached weight allows "STB-CM" by the attached weight and of the same size method (20mm outside diameter, 17mm in height) of record stabilizer "STB-MSX". I rearrange attached weight of "STB-MS" in "STB-CM" or can change with mass and a tendency of "STB-MSX" to sound quality by attached weight and hybrid wearing with "STB-CM" freely. Whenever the wearing number of STB-CM increases generally, it becomes the sound quality tune that is sharp, and is high speed.
(because high weight dimensions are different, I cannot attach STB-CM to STB-HWX.)

●The use that is the multi-use including the cable stabilizer insulator:
I install it in the lower part of an audio product and the speaker as an insulator to put through cable or the RCA plug as a cable stabilizer and am usable for a multi-use.
For a cable stabilizer, you may plurally use it for one cable, and the best tune that was correct to like it by regulating the wearing number of STB-CM is possible.
I can produce the original power supply cable which can perform the control on vibration of the cable part effectively if I put "STB-CM" through the cable beforehand when I create a power supply cable by myself. (it is necessary for a cable diameter to be less than 14mm.)
In addition, I show the effect as the stabilizer even if there is a gap between "STB-CM" and a cable and a plug. In addition, I use control on vibration tape or a buffer material together depending on preference, and managing it only for oneself is infinite.

●I receive it for pack (STB-CM-4) with four and six and pack it (STB-CM-6) and prepare:
You receive STB-CM for pack (STB-CM-4) with four and six and can buy a pack (STB-CM-6) without waste according to the necessary number as you prepare.
Example 1 for two speakers by three points of support insulator → "STB-CM-6:"
Example 2 to a CD Player and an amplifier by four points of support insulator → "STB-CM-4:"
Example 3 plug stabilizer → "STB-CM-4" of the plug both ends of the RCA cable (pair):
Example 4 plug stabilizer → "STB-CM-6" of the plug both ends of the RCA cable (pair) and both ends of the digital RCA cable one:

●The possibility that is infinite depending on an idea as a structural element of one's own item:
The use of STB-CM does not remain to a stabilizer and an insulator and hides infinite possibility depending on the idea of the user. For example, as a structural element of one's own item, I use it for the parts holders such as a board support, the condenser. Or I use it for the vibration decrement of the volume parts which are sensitive to vibration by pouring it over a volume knob, and various uses are assumed.
As the adhesion is possible, it becomes easy to treat the epoxy resin which is a matrix ingredient of STB-CM as parts for the craft by commercial adhesive including superglue, epoxy-related adhesive, the rubber system adhesive.
The beauty of STB-CM has possibility superior in a decoration use with it, and, not only an audio system, please find 使 いこなしを only for you for your idea.

Product specification

An article name: STB-CM-6
Materials: CFRP (carbon UD + carbon cross)
Dimensions: Outer diameter φ 20, inside diameter φ 14, wall thickness 3, height 17 (pipe shape)
Mass: 4 g
Load-resistant: 500 kg/
Heat-resistant: 120 degrees Celsius
Conductivity: A periphery, the inner periphery is conductivity nothing. The edge face is weak conductivity.
The number of the packing: Six