SB Acoustic Satori TW29BNWG-4 Tweeter
search
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter
  • SB Acoustic Satori TW29BNWG-4 Tweeter

SB Acoustics Satori TW29BNWG-4 Tweeter

TW29BNWG-4
380,00 € Без НДС
463.60 € с НДС для покупателей из ЕС

Satori TW29BNWG-4 Beryllium Dome Tweeter

Количество
Товары, которые можно заказывать

Description

SB Acoustics Satori Beryllium TW29BNWG-4 Dome Tweeter with waveguide

The new Satori Beryllium dome tweeter has arrived!

Beryllium is known for its open and spatial sound, often described as holographic. The self damping properties of Beryllium allow for an extended response without a huge spike in the response at higher frequencies seen in most metal dome tweeters. All dome materials have a different tonal and spatial presentation. Beryllium has a real positive difference, providing a experience unlike all other dome materials.

This is the Satori TW29BN-B Beryllium Dome Tweeter 8 ohm loaded in an aluminum waveguide.

Overall flange diamter: 170mm
Cutout: 146mm
Flange thickness: 5.25mm

  • Beryllium dome for non-resonant high frequency extension
  • Dual balanced compression chambers for improved dynamics
  • Dual copper caps for absolute minimum voice coil inductance and minimum phase shift
  • High saturation neodymium motor system with  T-shaped pole piece for lower distortion
  • Non-reflective cast aluminium chamber with  optimized damping for improved dynamics
  • Shallow flow optimized magnet structure for optimum coupling to rear chamber
  • CCAW voice coil for low moving mass
  • Long life silver lead wires
  • Low resonance frequency for extended range
  • Solid aluminium waveguide
  • Controlled directivity
  • Adapter ring for bolt-less mounting to driver

Specs

  • Nominal Impedance 4 Ω
  • DC resistance, Re 3.0 Ω
  • Voice coil inductance, Le 0.02 mH
  • Effective piston area, Sd 9.6 cm2
  • Voice coil diameter 29.0 mm
  • Voice coil height 2.0 mm
  • Air gap height 3.0 mm
  • Linear coil travel (p-p) 1.0 mm
  • Moving mass incl. air, Mms 0.46 g
  • Free air resonance, Fs 700 Hz
  • Sensitivity (2.83V/1m) 97 dB
  • Mechanical Q-factor, Qms 2.1
  • Electrical Q-factor, Qes 0.60
  • Total Q-factor, Qts 0.46
  • Force factor, Bl 3.1 Tm
  • Rated power handling* 80 W
  • Magnetic flux density 1.5 T
  • Magnet weight 0.1 kg
  • Net weight 0.6 kg

* IEC 268-5, high-pass Butterworth, 2600 Hz, 12 dB/oct.

SB Acoustics
TW29BNWG-4
Комментарии (0)
Еще нет отзывов.